Influence of Mullite Wool Waste on the Properties of Ceramics

Authors

  • Jurgita MALAIŠKIENĖ Vilnius Gediminas Technical University

DOI:

https://doi.org/10.5755/j01.ms.17.1.255

Keywords:

mullite wool, building ceramics, structural, physical, mechanical properties

Abstract

In the paper, the influence of mullite wool waste additive on the properties of building ceramics is analysed. For that purpose four formation masses were prepared, dried and fired at the analogous regimes (maximum firing temperature 1080 °C). The fired samples were used to determine the structural and physical-mechanical properties. The values of these parameters are analysed: water absorption, total and effective porosity, rate of capillary mass flow, reserve of porous volume, compressive strength, density and estimated exploitation frost resistance. It has been determined that mullite wool waste can be applied to the production of building ceramics and the optimum quantity of waste in a formation mass is 10 % according to weight. Water absorption of those ceramic samples was less than 4 %, compressive strength was 28.6 MPa, density - 2033 kg/m3, forecasted resistance to frost about 400 cycles.

http://dx.doi.org/10.5755/j01.ms.17.1.255

Downloads

Published

2011-03-10

Issue

Section

CONSTRUCTION MATERIALS