The Influence of Stabilisation on the Structure of Knits and Tensile Properties of Their Yarns

Authors

  • Rasa TREIGIENĖ Kaunas University of Technology
  • Ginta LAURECKIENĖ Kaunas University of Technology

DOI:

https://doi.org/10.5755/j01.ms.18.4.3096

Keywords:

hydrothermal stabilisation, plated jersey knit, stitches density

Abstract

Plated jersey knits of different composition were knitted and stabilised under hydrothermal conditions of 85 °C for 10, 20 or 30 min in steam ambience. The influence of stabilisation duration on knit structure was estimated as well as change of mechanical properties of the yarns. The obtained data show that 10 min of stabilisation influenced markedly the structure of plated jersey knits comparing with the same effect of 20 min and 30 min. The results of specific breaking force of polyester, cotton and wool yarns show decrease in their strength due to knitting and hydrothermal stabilisation processes.

DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3096

Downloads

Published

2012-12-13

Issue

Vol. 18 No. 4 (2012)

Section

TEXTILE MATERIALS

License

 

The copyrights for articles in this journal are retained by the author(s), with first publication rights granted to the journal. By virtue of their appearance in this open-access journal, articles are free to use with proper attribution in educational and other non-commercial settings.