Vol 21, No 3 (2015)

Table of Contents

ELECTRONIC AND OPTICAL MATERIALS

Silver Azide Nanoparticles Embedded into Silica as Energetic Nano-materials PDF
Petre Ionita, Corneliu Ghica, Raluca Damian, Daniela Culita, Ioana Turcu 329-332
Study of Optical and Electrical Properties of Organic Thin Films for Photovoltaic Applications PDF
Jan Pospisil, Veronika Schmiedova, Oldrich Zmeskal, Jiri Cerny 333-338
Synthesis of Tungsten Diselenide Nanoparticles by Chemical Vapor Condensation Method PDF
Oleg V. Tolochko, Vasilyeva S. Ekaterina, Albert G. Nasibulin, Maxim Maximov, Anil Sachdev, Xincheng XIAO 339-342

METALS, ALLOYS, COATINGS

Wear of different PVD coatings at industrial fine-blanking field tests PDF
Liina Lind, Priidu Peetsalu, Fjodor Sergejev 343-348
Nanocrystalline Diamond Films Deformation Observed During Sliding Tests Against Si3N4 Balls PDF
Andrei Bogatov 349-352
Characterization of TiC-FeCrMn Cermets Produced by Powder Metallurgy Method PDF
Märt Kolnes, Jakob Kübarsepp, Lauri Kollo, Mart Viljus 353-357
The Effect of WC/C Coating on the Wear of Bevel Gears Used in Coal Mines PDF
Waldemar Tuszynski, Marek Kalbarczyk, Michal Michalak, Remigiusz Michalczewski, Andrzej Wieczorek 358-363
Copper-based Composite Materials Reinforced with Carbon Nanostructures PDF
Tatiana Larionova 364-368
Formation of High Temperature Compounds in W-C-B System by Reactive Spark Plasma Sintering PDF
Janis Grabis, Ints Šteins, Inta Sīpola, Dzintra Rašmane 369-371
Hybrid Aluminum Composite Materials Based on Carbon Nanostructures PDF
Tatiana S. Koltsova, Albert G. Nasibulin, Alexei Shamshurin, Fedor Shakhov, Vesselin Mikhailov 372-375
Surface modification of austenitic steel by various glow-discharge nitriding methods PDF
Tomasz Borowski, Bogusława Adamczyk-Cieślak, Agnieszka Brojanowska, Krzysztof Kulikowski, Tadeusz Wierzchoń 376-381
Reactive Sintering of Bimodal WC-Co Hardmetals PDF
Marek Tarraste, Kristjan Juhani, Jüri Pirso, Mart Viljus 382-385
HIGH TEMPERATURE EROSION WEAR OF CERMET PARTICLES REINFORCED SELF-FLUXING ALLOY MATRIX HVOF SPRAYED COATINGS PDF
Andrei Surzhenkov, Dmitry Goljandin, Rainer Traksmaa, Mart Viljus, Kristofer Talviste, Aare Aruniit, Jyrki Latokartano, Priit Kulu 386-390
TESTING OF THE OSCILLATIONS DAMPING CAPABILITY BY EXTERNAL TURNING WITH THE USE OF ALTERNATE BARS IN THE CONSTRUCTION OF THE TURNING TOOL HOLDER PDF
Marten Madissoo 391-395

POLYMERS AND COMPOSITES, WOOD

Some exploitation properties of wood plastic composites (WPC), based on high density polyethylene and timber industry waste PDF
janis kajaks 396-399
Effect of heat treatment on wettability and MOE of pine and spruce wood PDF
Povilas Navickas 400-404
The Effect of Alkaline Material Particle Size on Adjustment Ability of Buffer Capacity PDF
Girts Bumanis 405-409
Ionic Liquid based polymer electrolytes for electrochemical sensors PDF
Jakub Altšmíd, Tomáš Syrový, Lucie Syrová, Petr Kuberský, Aleš Hamáček, Oldřich Zmeškal, Stanislav Nešpůrek 415-418
Temperature Distribution Simulation of a Polymer Bearing Basing on the Real Tribological Tests PDF
Artur Król, Krzysztof Kasza 410-414

TEXTILE MATERIALS

Investigation of Thermo-regulating Properties of Multilayer Textile Package PDF
Julija Baltušnikaitė, Lina Valasevičiūtė, Audronė Sankauskaitė, Kristina Dubinskaitė 419-424
Reflecting and Polarizing Properties of Conductive Fabrics in Ultra-High Frequency Range PDF
Oleg Kiprijanovič, Steponas Ašmontas, Jonas Matuzas, Lina Valasevičiūtė, Sandra Varnaitė-Žuravliova 425-428

CERAMICS AND GLASSES

THERMOMECHANICAL ANALYSIS OF ILLITE FROM FÜZÉRRADVÁNY PDF
Tomáš Húlan, Anton Trník, Igor Štubňa, Peter Bačík, Tiit Kaljuvee, Libor Vozár 429-434
The Influence of Sintering Temperature of Reactive Sintered (Ti, Mo)C-Ni Cermets PDF
Marek Jõeleht 435-438
The Investigation of the Zr-doped LaNbO4 Thin Ceramic Films by Electrochemical Impedance Spectroscopy PDF
Darius Virbukas, Kristina Bočkutė, Giedrius Laukaitis 439-443

CONSTRUCTION MATERIALS

Thermal Properties of High-Performance Concrete Containing Fine-Ground Ceramics as a Partial Cement Replacement PDF
Lenka Scheinherrová, Anton Trník, Tereza Kulovaná, Pavel Reiterman, Igor Medveď, Eva Vejmelková, Robert Černý 444-448
Moisture dependent thermal properties of hydrophilic mineral wool: application of the effective media theory PDF
Iñigo Antepara 449-454
EFFECT OF SANDSTONE ANISOTROPY ON ITS HEAT AND MOISTURE TRANSPORT PROPERTIES PDF
Jan Fořt 455-459

TESTING AND ANALYSIS OF MATERIALS

Solvents Measurement and Influence on health in the Work Environment in Manufacturing PDF
piia tint, Karin Reinhold, Ada Traumann 460-465
Neural Networks as a Tool to Characterise Oil State After Porous Bearings Prolonged Tests PDF
Artur Król, Krzysztof Gocman, Bolesław Giemza 466-472
Measurement of Geometry of Small Axisymmetric Sheet Metal Component after Forming PDF
Henri Lend 473-478


Print ISSN: 1392–1320
Online ISSN: 2029–7289