Table of Contents
ELECTRONIC AND OPTICAL MATERIALS
Acquisition Method of Three Dimensional Images Based on Liquid Crystal Micro Lens Array | |
Fan PAN, Hui LI | 303-306 |
Ti and Nb Addition to Ni3Al: Site Preferences and Alloying Efficiency from First Principles Calculations | |
Haiguang RUAN, Fuxiang HUANG, Zhaochao ZHANG, Zhi Qian CHEN | 307-312 |
The Phase and Morphology of CuInSe2 Film Prepared by One-Step electrodeposition | |
Kegao LIU, Chao XU, Hong LIU, Yong HU, Ludan SHI | 313-316 |
METALS, ALLOYS, COATINGS
Fabrication and Characterization of Bimodal Size Al2O3p Reinforced 7075 Aluminium Matrix Composites | |
Ruirui WU, Qiushu LI, Lu GUO, Yanxiang MA | 317-321 |
Electrochemical and Corrosion Properties of Aluminum Brass in Seawater Desalination Environments | |
Hong JU, Can SUN, Xia LI, Yunfei LIU | 322-327 |
POLYMERS AND COMPOSITES
Morphology and Physical and Chemical Performance Control of Mesoporous Composite Materials | |
Huanling XIE, AnQuan ZHENG, Jie LIU | 328-334 |
Thermal Protective Performance under Fire Conditions of Silica Aerogel Felt-bedded Firefighters’ Protective Clothing | |
Dongmei HUANG, Chenning GUO | 335-341 |
Influence of Solution and Spinning Parameters on Nanofiber Mat Creation of Poly(ethylene oxide) by Needleless Electrospinning | |
Timo GROTHE, Johannes BRIKMANN, Hubert MEISSNER, Andrea EHRMANN | 342-349 |
Ternary Copolymerization of Supercritical CO2, Propylene Oxide and Maleic Anhydride | |
Lan ZHENG, Kecun LIU, Yuqi WANG, An FAN | 350-355 |
CERAMICS AND GLASSES
Preparation and Characterization of Fe2O3-CaO-SiO2 Porous Glass Ceramics for Bacteria Immobilization | |
Bin LI, Yong Ya WANG, Wen Qin LUO | 356-361 |
CONSTRUCTION MATERIALS
Effects of Micro-silica and Nano-silica on Fresh Properties of Mortar | |
Leo Gu LI, Pui-Lam NG, Zhao-Hui HUANG, Jiang ZHU, Albert Kwok-Hung KWAN | 362-371 |
The Investigation on Flexural Toughness of Partially Steel Fiber Reinforced Concrete Immersed by Simulated Sea-Water | |
Feng GAO, Jun Yu GUO, Hui YUAN, Lei Chun FAN, Ke LI | 372-377 |
Prediction of Torsional Strength for Very High Early Strength Geopolymer | |
Woraphot PRACHASAREE, Abideng HAWA | 378-383 |
Impact Response and Strength Reliability of Green High Performance Fibre Reinforced Concrete Subjected to Freeze-thaw Cycles in NaCl Solution | |
Murali GUNASEKARAN, Muthulakshmi THANGAVEL, Nycilin Karunya NEMICHANDRAN, Iswarya RAVIKUMAR, Hannah Jennifer GLARANCE, Karthikeyan KOTHANDAPANI | 384-388 |
TESTING AND ANALYSIS OF MATERIALS
Adsorption Performance and Evaluation of Activated Carbon from Coconut Shell for the Removal of Chlorinated Phenols in Aqueous Medium | |
Collin G JOSEPH, SM ANISUZZAMAN, Sariah ABAN, Baba MUSTA, Kye Shane QUEK, Xin Lin WONG | 389-397 |
Fiber Laser Welding Properties of Copper Materials for Secondary Batteries | |
Young-Tae YOU, Jin-Woo KIM | 398-403 |
A Novel Material Identification Method Based on Material Surface Static Electricity Discharge | |
Licheng ZHU, Pengfei LI, Kai LIU, Xi CHEN, Gengchen SHI | 404-410 |
Numerical Simulation of Heat Transfer from Rotary Cylinder by Spray Cooling | |
Yong Qi LIU, Sen LU, Bin ZHENG, Peng SUN | 411-415 |
Effects of Environmental Surface Modification Methods on Physical Properties of Hemp Fibers | |
Nigar MERDAN | 416-421 |
Print ISSN: 1392–1320
Online ISSN: 2029–7289