Investigation of Properties of Asphalt Concrete Containing Boron Waste as Mineral Filler

Authors

  • Cahit GÜRER Afyon Kocatepe University, Engineering Faculty, Department of Civil Engineering.
  • Gülden Şirin SELMAN Afyon Kocatepe University, Graduate School of Natural and Applied Science

DOI:

https://doi.org/10.5755/j01.ms.22.1.12596

Keywords:

boron waste, asphalt concrete, filler, engineering properties, Marshall design

Abstract

During the manufacture of compounds in the boron mining industry a large quantity of waste boron is produced which has detrimental effects on the environment. Large areas have to be allocated for the disposal of this waste. Today with an increase in infrastructure construction, more efficient use of the existing sources of raw materials has become an obligation and this involves the recycling of various waste materials. Road construction requires a significant amount of raw materials and it is possible that substantial amounts of boron-containing waste materials can be recycled in these applications. This study investigates the usability of boron wastes as filler in asphalt concrete. For this purpose, asphalt concrete samples were produced using mineral fillers containing 4%, 5%, 6%, 7% and 8% boron waste as well as a 6% limestone filler (6%L) as the control sample. The Marshall Design, mechanical immersion and Marshall Stability test after a freeze-thaw cycle and indirect tensile stiffness modulus (ITSM) test were performed for each of the series. The results of this experimental study showed that boron waste can be used in medium and low trafficked asphalt concrete pavements wearing courses as filler.

Author Biographies

Cahit GÜRER, Afyon Kocatepe University, Engineering Faculty, Department of Civil Engineering.

Civil Engineering

Gülden Şirin SELMAN, Afyon Kocatepe University, Graduate School of Natural and Applied Science

Civil Engineering

Downloads

Published

2016-01-21

Issue

Section

CONSTRUCTION MATERIALS