Multi-response Optimization of End Milling Parameters for Al-Zn-Mg/SiC Co-continuous Composite Using Response Surface Methodology

Authors

  • Prasanth ACHUTHAMENON SYLAJAKUMARI Assistant Professor (Sr.Gr.), Department of Mechanical Engineering, PSG College of Technology, Coimbatore - 641004, India
  • Ramesh RAMAKRISHNASAMY Professor, Department of Mechanical Engineering, PSG Institute of Technology and Applied Research, Neelambur, Coimbatore - 641062, India
  • Gopalakrishnan PALANIAPPAN Professor, Department of Metallurgical Engineering, PSG College of Technology, Coimbatore - 641004, India
  • Ramu MURUGAN Associate Professor, Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India

DOI:

https://doi.org/10.5755/j01.ms.25.4.21000

Keywords:

Co-continuous composite, response surface methodology (RSM), machinability, optimization

Abstract

A co-continuous ceramic composite (C4) was manufactured by gravity infiltration. The effect of varying machining parameters namely, speed, feed and depth of cut during end milling of C4, on the multi-responses of surface roughness, tool wear and depth of cut was investigated using response surface methodology. Non-linear regression models were generated and optimal machining parameters were determined using desirability analysis. Confirmation experiments performed, validated the models with a ± 5 % error in prediction.

Author Biographies

Prasanth ACHUTHAMENON SYLAJAKUMARI, Assistant Professor (Sr.Gr.), Department of Mechanical Engineering, PSG College of Technology, Coimbatore - 641004, India

Assistant Professor (Sr.Gr.), Department of Mechanical Engineering

Ramesh RAMAKRISHNASAMY, Professor, Department of Mechanical Engineering, PSG Institute of Technology and Applied Research, Neelambur, Coimbatore - 641062, India

Professor, Department of Mechanical Engineering,

Gopalakrishnan PALANIAPPAN, Professor, Department of Metallurgical Engineering, PSG College of Technology, Coimbatore - 641004, India

Professor, Department of Metallurgical Engineering

Ramu MURUGAN, Associate Professor, Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India

Associate Professor, Department of Mechanical Engineering,

Downloads

Published

2019-06-27

Issue

Section

TESTING AND ANALYSIS OF MATERIALS