Low-pickle Processing of Leather: Assessment of Leather Tanning Quality by Methods of Thermal Analysis

Authors

  • Virgilijus VALEIKA Virgilijus Valeika virgilijus.valeika@ktu.lt +37065270233 Kaunas University of Technology Department of Physical and Inorganic Chemistry Studentu str. 56, LT-51424 Kaunas, Lithuanua Natural leather, leather technology, polymer, biopolymers

DOI:

https://doi.org/10.5755/j01.ms.26.3.22509

Keywords:

deliming, leather, tanning, crosslinking, differential scanning calorimetry, thermo-gravimetric analysis

Abstract

Pelt obtained by deliming with peracetic acid can be chromed after additional treatment with sodium chloride or oxalic acid solution, or directly tanned using synthetic tannins. The results of differential scanning calorimetry and thermogravimetric analyses have suggested that any tanning increases thermal stability of leather collagen. The produced chrome-free leather, despite its high tensile strength, is not characterized by high shrinkage temperature what indicates insufficient thermal stability of such leather. This fact contradicts the results of differential scanning calorimetry and thermogravimetric analyses results which show the high thermal stability of the chrome-free leather. It has been concluded that scanning calorimetry and thermogravimetric analyses are not sufficient for the appropriate assessment of leather obtained by the methods of various tanning, and the conclusions about changes in leather structure and quality of leather can not be drawn only upon results of the mentioned analyses.

Author Biography

Virgilijus VALEIKA, Virgilijus Valeika virgilijus.valeika@ktu.lt +37065270233 Kaunas University of Technology Department of Physical and Inorganic Chemistry Studentu str. 56, LT-51424 Kaunas, Lithuanua Natural leather, leather technology, polymer, biopolymers

Department of Physical and Inorganic Chemistry

Dr.

Downloads

Published

2020-03-17

Issue

Section

POLYMERS AND COMPOSITES