Adhesive-bonded Repair for Cracked Metal Material of Remanufacture

Authors

  • Wenhua JIA School of Mechanical Engineering, Nanjing Institute of Technology
  • Chenbo YIN Institute of Automobile and Construction Machinery, Nanjing University of Technology
  • Guo LI School of Mechanical Engineering, Nanjing Institute of Technology
  • Binghui JIA School of Mechanical Engineering, Nanjing Institute of Technology

DOI:

https://doi.org/10.5755/j01.ms.23.3.17168

Keywords:

adhesive-bonded repair, cracked metal material, remanufacture

Abstract

By investigating Q235 steel containing center cracks commonly used in construction machinery, this study analyzed the stress intensity factors at the crack tip and the crack growth rate before and after the repair of the structure. The static mechanical properties and the stress-strain at different positions of the structure were studied before and after the repair. and The principle of adhesively-bonded patch repair was also verified. The obtained results showed that the static mechanical properties of the damaged metal structure were significantly improved to 80%. This was done through a single-sided repair using carbon/epoxy resin. A 90% improvement was accomplished through double-sided repair.

DOI: http://dx.doi.org/10.5755/j01.ms.23.3.17168

Downloads

Published

2017-04-21

Issue

Vol. 23 No. 3 (2017)

Section

METALS, ALLOYS, COATINGS

License

 

The copyrights for articles in this journal are retained by the author(s), with first publication rights granted to the journal. By virtue of their appearance in this open-access journal, articles are free to use with proper attribution in educational and other non-commercial settings.