An Experimental and Numerical Study of the Dynamic Response of Composites under Impact Loading at Low Temperatures

Authors

  • Amin Torabizadeh Assistant professor, University of Applied Science and Technology
  • Masoud Pour Assistant professor, Quchan University of Advance Technologies Engineering

DOI:

https://doi.org/10.5755/j01.ms.21.1.5560

Keywords:

strain rate, charpy impact, failure mechanisms, energy absorption, analytical method

Abstract

An analytical method was applied to investigate the effects of strain rate and low temperature on the energy absorption of composite specimens. The performance of analytical model was found to be adequate for modeling composites before failure initiation. Results indicated that impact performance of composites is affected over the range of temperature considered. Failure mechanism was changed from matrix cracking at room temperature to delamination and fiber breakage at low temperatures. Also it was showed that about 70 percent of total energy absorbed by specimen was used to destruction the composite under different types of failure mechanisms.

DOI: http://dx.doi.org/10.5755/j01.ms.21.1.5560

Author Biographies

Amin Torabizadeh, Assistant professor, University of Applied Science and Technology

Design and Technical Drawing Department

Masoud Pour, Assistant professor, Quchan University of Advance Technologies Engineering

Mechanical engineering department

Downloads

Published

2015-03-24

Issue

Section

POLYMERS AND COMPOSITES