Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics

Authors

  • Yuli SUN Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Baohong XIA Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Chunxiang XIE Shanghai Institute of Spaceflight Control Technology
  • Shouxin YU Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Xiaoliang ZHU Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Wenzhuang LU Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Jun LI Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology
  • Dunwen ZUO Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology

DOI:

https://doi.org/10.5755/j01.ms.20.4.6149

Keywords:

layered, ice, abrasive, polishing, glass-ceramics

Abstract

Layered ice bonded abrasive tools (LIBAT) is a new kind of one which not only has the ability of lapping and polishing but also has the effect of self-dressing. In this paper, two kinds of layered ice bonded abrasive tools were designed and manufactured. Experimental studies on layered ice bonded abrasive (LIBA) polishing of glass-ceramics were conducted. The results show that the surface topography of glass-ceramics polished by micro α-Al2O3-nano α-Al2O3 LIBAT is better than that of polished by micro α-Al2O3-nano SiO2 LIBAT. The surface roughness Sa of glass-ceramics polished by the two kinds of LIBAT is at the nanometer scale. The reasons of this phenomenon were analyzed. The experimental results illustrate that the LIBAT shows good effect and can be used in production practice.

DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6149

Downloads

Published

2014-12-12

Issue

Section

CERAMICS AND GLASSES