Application of Ceramic Powder as Supplementary Cementitious Material in Lime Plasters

Authors

  • Monika ČÁCHOVÁ
  • Eva VEJMELKOVÁ
  • Dana KOŇÁKOVÁ
  • Jaromír ŽUMÁR
  • Martin KEPPERT
  • Pavel REITERMAN
  • Robert ČERNÝ

DOI:

https://doi.org/10.5755/j01.ms.22.3.7433

Keywords:

plaster, lime, ceramic powder, mechanical properties, hygric properties, thermal properties

Abstract

In this paper, the properties of plasters based on lime – brick powder binder of varying composition (ceramics content from 0 to 80 %) are studied. The plasters are prepared with a constant water amount. The pore size distribution is thus influenced in a positive way; the total porosity increases with the ceramics content but the volume of capillary pores is reduced. It results in lower water vapor diffusion resistance factor while the apparent moisture diffusivity coefficient increases just moderately. The influence of ceramic on strength of plasters is not found very important. The thermal conductivity of plasters containing ceramics is lower than those with the pure lime what is again in agreement with the pore size distribution. It can be concluded that fine brick powder can be used as pozzolanic admixture in lime based plasters with a positive influence on its functional parameters.

DOI: http://dx.doi.org/10.5755/j01.ms.22.3.7433

Downloads

Published

2016-09-01

Issue

Section

CONSTRUCTION MATERIALS