Table of Contents
ELECTRONIC AND OPTICAL MATERIALS
| The Investigation of E-beam Deposited Titanium Dioxide and Calcium Titanate Thin Films | |
| Kristina BOČKUTĖ, Giedrius LAUKAITIS, Darius VIRBUKAS, Darius MILČIUS | 245-249 |
| Preparation of superionic ceramics by spark plasma method | |
| Tomas ŠALKUS, Ints STEINS, Maud BARRE, Algimantas KEŽIONIS, Antanas Feliksas ORLIUKAS | 250-253 |
| Application of Ge Nanowire for Two-Input Bistable Nanoelectromechanical Switch | |
| Jana ANDZANE, Juris PRIKULIS, Raimonds MEIJA, Jelena KOSMACA, Subhajit BISWAS, Justin D HOLMES, Donats ERTS | 254-257 |
METALS, ALLOYS, COATINGS
| Effect of Heat Treatments on the Microstructure, Hardness and Corrosion Behavior of Nondendritic AlSi9Cu3(Fe) Cast Alloy | |
| Nacer ZAZI | 258-263 |
| Kinetics of Ni:C Thin Film Composition Formation at Different Temperatures and Fluxes | |
| Gediminas KAIRAITIS, Arvaidas GALDIKAS | 264-269 |
| Plasma Deposition and Characterization of Copper-doped Cobalt Oxide Nanocatalysts | |
| Jacek TYCZKOWSKI, Ryszard KAPICA, Wiktor REDZYNIA, Marcin KOZANECKI, Mohamed M. CHEHIMI, Jan SIELSKI, Sławomir M. KUBERSKI | 270-276 |
| Modeling of Processes in Co-Based Coatings Exposed to Plasma Jet Irradiation | |
| Tatyana KOLESNIKOVA, Darya ALONTSEVA, Alexander POGREBNJAK, Alyona RUSSAKOVA | 277-282 |
POLYMERS AND COMPOSITES, WOOD
| Epoxy Resin and Polyurethane Compositions from Glycolized Poly (ethylene terephthalate) Wastes | |
| Gintaras MACIJAUSKAS, Virginija JANKAUSKAITĖ | 283-290 |
| Effect of Heat Treatment on Sorption Properties and Dimensional Stability of Wood | |
| Povilas NAVICKAS, Darius ALBREKTAS | 291-294 |
TEXTILE MATERIALS
| The Analysis of Possibilities to Electrospin Nonwoven Mats from Pure PCL Nano/Micro Fibres | |
| Erika ADOMAVIČIŪTĖ, Solveiga PUPKEVIČIŪTĖ, Sigitas STANYS | 295-300 |
| Interaction of Alginate/Copper System on Cotton and Bamboo Fabrics: The Effect on Antimicrobial Activity and Thermophysiological Comfort Properties | |
| Muhammet UZUN | 301-308 |
| The Influence of Chemical Treatment on Cotton Fiber Materials’ Mechanical Parameters | |
| Jurgita KOŽENIAUSKIENĖ, Matas GUTAUSKAS, Virginija DAUKANTIENĖ | 309-313 |
| Weaves and Colours of Lithuanian Folk Skirts Fabrics | |
| Eglė KUMPIKAITĖ, Liucina KOT | 314-318 |
CERAMICS AND GLASSES
| Investigation of the mechanism of interaction at the hydrothermal conditions of zeolite – cubic analcime with the Li+, Mg2+, Sr2+ and Fe3+ ions | |
| Asta TRAIDARAITĖ, Alfredas BALANDIS | 319-325 |
CONSTRUCTION MATERIALS
| Ageing of Dry Cement Mixes for Finishing Purposes | |
| Bronius VEKTARIS, Antanas KAZILIŪNAS, Ieva STRIŪGIENĖ | 326-330 |
| Applicability of the Waste Fibres in Cement Paste | |
| Regina KALPOKAITĖ DIČKUVIENĖ, Irena LUKOŠIŪTĖ, Kristina BRINKIENĖ, Arūnas BALTUŠNIKAS, Jūratė ČĖSNIENĖ | 331-336 |
| The effect of plasticizing admixture on the physical and mechanical properties of concrete with limestone cement | |
| Džigita NAGROCKIENĖ, Albinas GAILIUS, Gintautas SKRIPKIŪNAS, Ina PUNDIENĖ, Giedrius GIRSKAS, Anastasija ABASOVA | 337-342 |
| The Evaluation Methods of Decorative Concrete Horizontal Surfaces Quality | |
| Albertas KLOVAS, Mindaugas DAUKŠYS | 343-348 |
TESTING AND ANALYSIS OF MATERIALS
| Aging Effects in Irradiated MgH2; Connection to Hydrogen Production | |
| Sandra KURKO, Ljiljana MATOVIĆ, Radojka VUJASIN, Igor MILANOVIĆ, Željka RAŠKOVIĆ LOVRE, Nenad IVANOVIĆ, Jasmina GRBOVIĆ NOVAKOVIĆ | 349-353 |
| Referatai | |
| 354-360 |
Print ISSN: 1392–1320
Online ISSN: 2029–7289