Vol. 11 No. 4 (2005)

Published: 2005-12-15

Articles

Ion Beam Synthesis of the Anti-sticking Diamond-like Carbon Layers

Šarūnas MEŠKINIS∗, Vitoldas KOPUSTINSKAS, Kęstutis ŠLAPIKAS, Asta GUOBIENĖ, Rimas GUDAITIS, Sigitas TAMULEVIČIUS

317-319
- PDF
Influence of Steel Cleanliness by Ladle Furnace Processes

Ľubomír MIHOK∗, Katarína SEILEROVÁ, Mária FROHLICHOVÁ

320-323
- PDF
Charcoal Blast Furnaces on the Territory of Slovakia

Ľubomír MIHOK∗, Ľudmila MORAVČÍKOVÁ, Jozef PETRÍK

324-328
- PDF
Melting of Ni-Cr Cast Steel with Additions of Niobium and Titanium

Malgorzata GARBIAK∗, Bogdan PIEKARSKI

329-333
- PDF
Determination of Modulus of Elasticity in Hypoeutectic Silumin Castings

Mieczyslaw HAJKOWSKI∗

334-337
- PDF
Some Peculiarities in Deformation and Fracture Behaviour of Austempered Ductile Cast Iron

Jan KOHOUT∗, Stanislav VĚCHET

338-348
- PDF
Mechanical Reclamation Treatment of Used Silica Foundry Sand at Extra-low and Ambient Temperatures

Jozef DANKO∗, Rafal DANKO

344-347
- PDF
Electrolytic Phase Extraction in Stabilised Austenitic Cast Steel

Renata CHYLIŃSKA, Malgorzata GARBIAK∗, Bogdan PIEKARSKI

348-351
- PDF
Investigation of (Ti, Al)N Based Coatings Grown by Physical Vapor Deposition

Vitali PODGURSKY∗, Bo TORP, Rainer TRAKSMAA, Renno VEINTHAL, Mart VILJUS, Olivier CODDET, Marcus MORSTEIN, Andre GREGOR, Priit KULU

352-355
- PDF
Determination of the Modulus of Elasticity, Poisson´s Ratio and the Coefficient of Thermal Expansion of Electrochemically Metallized Nickel Coatings

Harri LILLE∗, Jakub KÕO

356-359
- PDF
Heat Balance of Prototype Plasma Furnace for Melting Reactive Metals

Andrzej MODRZYŃSKI∗, Krzysztof GRZEŚKOWIAK

360-363
- PDF
Effect of Moulding Sand Thermal Capacity on Morphology of Carbide Phase in High-Chromium Cast Iron

Grzegorz BIEŃKO, Andrzej DROTLEW∗

364-367
- PDF
Investigation of Ductile Casting Iron Risers in the Simulation Method

Stasys BOČKUS, Arvydas VENCKŪNAS, Gintautas ŽALDARYS∗

368-371
- PDF
Preparation of Ti(N, C) Based Nanosized Powders and Their Densification

Janis GRABIS∗, Ilmars ZALITE

347-375
- PDF
Characterization of the Structure and Properties of Composite Powder Materials and Coatings

Renno VEINTHAL∗, Priit KULU, Helmo KÄERDI

376-380
- PDF
Li-containing Oxide Nanopowders Prepared by the Plasma Chemical Synthesis

Alexander ORLOV∗, Jānis GRABIS, Aija KRŪMIŅA, Dzintra RAŠMANE, Dzidra JANKOVIČA, Gundega HEIDEMANE

381-384
- PDF
Technology and Characterization of Composite Thermal Spray Powders

Priidu PEETSALU∗, Sergei ZIMAKOV, Jüri PIRSO, Valdek MIKLI, Riho TARBE, Priit KULU

385-389
- PDF
Behaviour of Young’s Modulus in Shape Memory Alloys upon Mechanical Loading

Wei Min HUANG, Jing Ai WU, Bee Yan LIM, Ivan VAHHI∗

390-393
- PDF
Investigations of Structure and Tribological Properties of the Lightweight c-BN-based Composites

Lembit KOMMEL∗, Eduard KIMMARI

394-397
- PDF
Disintegrator as Device for Milling of Mineral Ores

Dmitri GOLJANDIN∗, Priit KULU, Helmo KÄERDI, Alex BRUWIER

398-402
- PDF
The Influence of Log Offset on Sawn Timber Volume Yield

Antanas BALTRUŠAITIS∗, Vilija PRANCKEVIČIENĖ

403-406
- PDF
Mechanical Properties of Polypropylene Multifilament Yarns in Dependence of their Drawing Ratio

Arvydas VITKAUSKAS∗, Rūta MIGLINAITĖ, Paula VESA, Arja PUOLAKKA

407-410
- PDF
Relationship Between the Inverse Stress Relaxation and the Viscoelastic Recovery of Filament Yarns

Rita POCIENĖ∗, Arvydas VITKAUSKAS

411-415
- PDF
Simulation and Experimental Research of the Process of Impulse Densification of Moulding Sands

Tadeusz MIKULCZYŃSKI∗, Daniel NOWAK

416-419
- PDF