, Vilnius Gediminas Technical University, Lithuania
-
Materials Science Vol. 29 No. 1 (2023) - ELECTRONIC AND OPTICAL MATERIALS
The Investigation of Vortex Motion in the YBCO Devices Manufactured Utilizing a Gaussian-shaped Optical Spot from a Continuous-wave Laser
Abstract PDF -
Materials Science Vol. 17 No. 1 (2011) - METALS, ALLOYS, COATINGS
Quality Analysis of Welded and Soldered Joints of Cu-Nb Microcomposite Wires
Abstract PDF -
Materials Science Vol. 17 No. 1 (2011) - CONSTRUCTION MATERIALS
Investigation of Peculiarities in the Hardening Process of Portland Cements with Active Additives out of Waste
Abstract PDF -
Materials Science Vol. 17 No. 1 (2011) - CONSTRUCTION MATERIALS
Influence of Mullite Wool Waste on the Properties of Ceramics
Abstract PDF -
Materials Science Vol. 17 No. 1 (2011) - CONSTRUCTION MATERIALS
Fire Resistance Tests of Various Fire Protective Coatings
Abstract PDF -
Materials Science Vol. 17 No. 2 (2011) - CERAMICS AND GLASSES
Investigation of Density and Velocity of Abrikosov Vortices in YBa2Cu3O7–x Superconducting Thin Films with a Laser-Written Channel for Easy Vortex Motion
Abstract PDF -
Materials Science Vol. 17 No. 2 (2011) - CONSTRUCTION MATERIALS
Predicting Frost Resistance of Concrete with Different Coarse Aggregate Concentration by Porosity Parameters
Abstract PDF -
Materials Science Vol. 17 No. 2 (2011) - CONSTRUCTION MATERIALS
Evaluation of Structure Influence on Thermal Conductivity of Thermal Insulating Materials from Renewable Resources
Abstract PDF -
Materials Science Vol. 17 No. 3 (2011) - CONSTRUCTION MATERIALS
Resistance of Phosphogypsum Cement Pozzolanic Compositions against the Influence of Water
Abstract PDF -
Materials Science Vol. 18 No. 2 (2012) - CONSTRUCTION MATERIALS
Analysis of Structure and Deformation Mechanisms of Mineral Wool Slabs under Compression
Abstract PDF -
Materials Science Vol. 18 No. 3 (2012) - ELECTRONIC AND OPTICAL MATERIALS
Efficiency Enhancement of Silicon Solar Cells by Porous Silicon Technology
Abstract PDF -
Materials Science Vol. 18 No. 3 (2012) - CONSTRUCTION MATERIALS
Investigations of Forming Mixture Parameters of Autoclaved Aerated Concrete with Nanoadditives
Abstract PDF -
Materials Science Vol. 18 No. 3 (2012) - CONSTRUCTION MATERIALS
Application of Technogenic-Raw Material and Burning Out Additive in Composite Ceramic System
Abstract PDF -
Materials Science Vol. 18 No. 4 (2012) - CONSTRUCTION MATERIALS
The Effect of Deflocculants on the Structure and Physical-Mechanical Properties of Fireclay Refractory Castables
Abstract PDF -
Materials Science Vol. 18 No. 4 (2012) - CONSTRUCTION MATERIALS
Influence of Assorted Waste on Building Ceramic Properties
Abstract PDF -
Materials Science Vol. 19 No. 4 (2013) - METALS, ALLOYS, COATINGS
NiCrSiB Thermal Sprayed Coatings Refused under Vibratory Treatment
Abstract PDF -
Materials Science Vol. 19 No. 1 (2013) - CONSTRUCTION MATERIALS
The Influence of Crushed Concrete Demolition Waste Aggregates on the Hardening Process of Concrete Mixtures
Abstract PDF -
Materials Science Vol. 19 No. 1 (2013) - CONSTRUCTION MATERIALS
Microstructure Changes in Hardened Cement Paste after Freezing – Thawing Cycles
Abstract PDF -
Materials Science Vol. 21 No. 2 (2015) - ELECTRONIC AND OPTICAL MATERIALS
Dynamical Study of Heat Transport Properties of Porous Silicon
Abstract PDF -
Materials Science Vol. 19 No. 2 (2013) - CERAMICS AND GLASSES
Influence of Hydrothermal Synthesis Condition on Xonotlite Crystal Morphology
Abstract PDF -
Materials Science Vol. 19 No. 2 (2013) - CONSTRUCTION MATERIALS
Influence of Zeolite Additive on the Properties of Plaster Used for External Walls from Autoclaved Aerated Concrete
Abstract PDF -
Materials Science Vol. 19 No. 2 (2013) - CONSTRUCTION MATERIALS
Stability of Strength and Deformation Characteristics of Expanded Polystyrene (EPS) within the Time of Long-Term Investigation of Creep Strain under Permanent Compressive Loading
Abstract PDF -
Materials Science Vol. 21 No. 1 (2015) - CONSTRUCTION MATERIALS
Impact of Superplasticizer on Rheological Properties and Hardening Process of Different Portland Cement Pastes
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - CERAMICS AND GLASSES
Investigation of Optically Modified YBa2Cu3O7–x Films by Means of X-ray Microanalysis Technique
Abstract PDF -
Materials Science Vol. 21 No. 2 (2015) - METALS, ALLOYS, COATINGS
Ni-Cr-Si-B-Fe-C Thermal Sprayed Coatings Refused Under Vibratory Treatment
Abstract PDF -
Materials Science Vol. 10 No. 1 (2004) - Articles
Atomic Emission Spectrometric Analysis in the Assessment of Wearing of Vehicle Engines
Abstract PDF -
Materials Science Vol. 16 No. 2 (2010) - CONSTRUCTION MATERIALS
Hazardous Wastes Recycling by Solidification/Stabilization Method
Abstract PDF -
Materials Science Vol. 16 No. 3 (2010) - CONSTRUCTION MATERIALS
Influence of Amorphous Nanodispersive SiO2 Additive on Structure Formation and Properties of Autoclaved Aerated Concrete
Abstract PDF -
Materials Science Vol. 16 No. 4 (2010) - CONSTRUCTION MATERIALS
Frost Resistant Porous Ceramics
Abstract PDF -
Materials Science Vol. 15 No. 1 (2009) - CERAMICS AND GLASSES
Influence of Structural Parameters on the Frost Resistance of Clay Masonry Units
Abstract PDF -
Materials Science Vol. 15 No. 4 (2009) - CONSTRUCTION MATERIALS
Analysis of the Properties of Lightweight Concrete with the Technogenic Waste Material
Abstract PDF -
Materials Science Vol. 14 No. 4 (2008) - CERAMICS AND GLASSES
Monitoring of Concrete Resistance to Chloride Penetration
Abstract PDF -
Materials Science Vol. 14 No. 1 (2008) - CERAMICS AND GLASSES
Investigation of Properties of Composite Ceramics
Abstract PDF -
Materials Science Vol. 14 No. 1 (2008) - CERAMICS AND GLASSES
The Effect of Waste Oil-Cracking Catalyst on the Properties of MCC-Type Castable
Abstract PDF -
Materials Science Vol. 13 No. 1 (2007) - CERAMICS AND GLASSES
Microbiological Destruction of Constructional and Decoration Materials of Buildings
Abstract PDF -
Materials Science Vol. 13 No. 2 (2007) - METALS, ALLOYS, COATINGS
Reliability Estimation of the Austenitic Steels Welded Joints
Abstract PDF -
Materials Science Vol. 13 No. 2 (2007) - METALS, ALLOYS, COATINGS
The Influence of Temperature-Time Parameter of Welded Joints Thermal Treatment on Strength-Related Characteristics of Chromium-Molybdenum and Low-Alloy Manganese Steels
Abstract PDF -
Materials Science Vol. 13 No. 3 (2007) - Articles
Investigations of Hydro- and Hygro-sorption Properties of Silicate Masonry Products
Abstract PDF -
Materials Science Vol. 13 No. 3 (2007) - Articles
Tetracomponent System State Diagrams for Analysis of Material Compositions
Abstract PDF -
Materials Science Vol. 13 No. 4 (2007) - POLYMERS AND COMPOSITES
Prediction of Creep Strain of the Expanded Polystyrene (EPS) in Long-term Compression
Abstract PDF -
Materials Science Vol. 13 No. 4 (2007) - CERAMICS AND GLASSES
The Influence of Some Surfactants on Porous Concrete Properties
Abstract PDF -
Materials Science Vol. 13 No. 4 (2007) - CERAMICS AND GLASSES
Properties of Suspension and Pastes of Different Types of Microsilica with Various Deflocculants
Abstract PDF -
Materials Science Vol. 13 No. 4 (2007) - CERAMICS AND GLASSES
Investigation of the Compressive Stress of the Layered-Structure Dual-Density Mineral Wool Slabs
Abstract PDF -
Materials Science Vol. 12 No. 1 (2006) - POLYMERS AND COMPOSITES
Singularity and Importance of Determination of Wood Charring Rate in Fire Investigation
Abstract PDF -
Materials Science Vol. 12 No. 1 (2006) - CERAMICS AND GLASSES
Influence of Technological Factors on the Structural Parameters of Clay Masonry Units
Abstract PDF -
Materials Science Vol. 12 No. 1 (2006) - CERAMICS AND GLASSES
Optimisation of the Aggregates Composition in Concrete
Abstract PDF -
Materials Science Vol. 12 No. 3 (2006) - Articles
Use of Rubber Waste in the Ceramic
Abstract PDF -
Materials Science Vol. 12 No. 4 (2006) - CERAMICS AND GLASSES
Carbonation of Alumina Cement-bonded Conventional Refractory Castable in Fireplace
Abstract PDF -
Materials Science Vol. 12 No. 4 (2006) - CERAMICS AND GLASSES
Performance of Loose-Fill Cellulose Insulation
Abstract PDF -
Materials Science Vol. 12 No. 4 (2006) - CERAMICS AND GLASSES
Peculiarities of Destruction Mechanism in Ceramic Products under Simulated Exploitation Conditions
Abstract PDF -
Materials Science Vol. 12 No. 4 (2006) - CERAMICS AND GLASSES
Influence of a Technogenic Silicate Product Admixtures on Silicate Concrete Properties
Abstract -
Materials Science Vol. 11 No. 1 (2005) - Articles
The Alkali and Temperature Resistance of Some Fibres
Abstract PDF -
Materials Science Vol. 11 No. 1 (2005) - Articles
Influence of Technological Factors on the Physical-Mechanical Properties of Clay Masonry Units
Abstract PDF -
Materials Science Vol. 11 No. 1 (2005) - Articles
Application of Catalyst Waste to Ceramics Made of Raw Materials
Abstract PDF -
Materials Science Vol. 10 No. 1 (2004) - Articles
Investigation of Hydrothermal Performance of Fibrous Thermal Insulation Materials
Abstract PDF -
Materials Science Vol. 10 No. 2 (2004) - Articles
Recent Developments in the Deposition of c-BN Coatings
Abstract PDF -
Materials Science Vol. 10 No. 3 (2004) - Articles
The Use of Quickly Slaking Lime in Production of Cellular Concrete
Abstract PDF -
Materials Science Vol. 10 No. 4 (2004) - Articles
Assessment of Strength under Compression of Expanded Polystyrene (EPS) Slabs
Abstract PDF -
Materials Science Vol. 10 No. 4 (2004) - Articles
The Research on Expanded Polystyrene Slabs Bending Strength and Bending Stress
Abstract PDF -
Materials Science Vol. 10 No. 4 (2004) - Articles
Comparative Research on Exploitation Frost Resistance of Ceramics and Concrete
Abstract PDF -
Materials Science Vol. 9 No. 1 (2003) - Articles
Determination of Concrete Structural Defects by Infrared Spectrum Analysis
Abstract PDF -
Materials Science Vol. 9 No. 2 (2003) - Articles
Dynamics of Properties and Structure Changes of Pearlite Steel during Long-lived Operation
Abstract PDF -
Materials Science Vol. 9 No. 2 (2003) - Articles
The Welding Deformations of Chrome-nickel Stainless Steels
Abstract PDF -
Materials Science Vol. 9 No. 2 (2003) - Articles
The Structure of Welded Austenitic and Non-austenitic Steel Joints
Abstract PDF -
Materials Science Vol. 9 No. 4 (2003) - Articles
Influence of the Particles Velocity on the Arc Spraying Coating Adhesion
Abstract PDF -
Materials Science Vol. 21 No. 2 (2015) - CONSTRUCTION MATERIALS
New Method for Determination of Mineral Wool Macrostructure and Their Relation with Product’s Mechanical Parameters
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - CERAMICS AND GLASSES
Microwave Detection Properties of Asymmetrically Narrowed YBa2Cu3O7–x Structures
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - CERAMICS AND GLASSES
Fast Two-stage Protector Against Electromagnetic Pulse Based on Electroresistance Effect in Polycrystalline La-Sr(Ca)-Mn-O Films
Abstract PDF -
Materials Science Vol. 19 No. 4 (2013) - ELECTRONIC AND OPTICAL MATERIALS
Influence of Preparation Conditions on Electrical Properties of the Al/Alq3/Si Diode Structures
Abstract PDF -
Materials Science Vol. 17 No. 1 (2011) - METALS, ALLOYS, COATINGS
Resistance of Chromated Zinc Coatings to the Impact of Microscopic Fungi
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - ELECTRONIC AND OPTICAL MATERIALS
Time-resolved Photoluminescence Characterisation of GaAs/AlxGa1–xAs Structures Designed for Microwave and Terahertz Detectors
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - ELECTRONIC AND OPTICAL MATERIALS
Photoresponse of Metal-PbTe Structures to CO2 Laser Excitation
Abstract PDF -
Materials Science Vol. 20 No. 2 (2014) - ELECTRONIC AND OPTICAL MATERIALS
Peculiarities of Temperature Dependence of Detected Voltage by GaAs/Al0.25Ga0.75As Heterojunction Microwave Diode Near Interwalley Crossover
Abstract PDF